Description
This kit is used when there is no front shock in the stock location to limit the droop travel.
With no shock acting as the droop limiter, the upper control arm becomes the droop limiter which transfers that load causing premature wear to the upper ball joint. It is a bolt in installation but requires holes to be drilled to mount the upper end, and there is adjustability built in to fine tune the length to control the droop limit.
Details:
- Drive: 2WD/4WD
- Location: Front
https://youtu.be/99NCMJyyTSM
https://www.asapnetwork.org/sites/default/files/gfgq/installation/7046_3.pdf